Bacharach Flue-Gas Sample Conditioning System Especificaciones descargar pdf (Pagina 67)

ECA 450 Maintenance

Instruction 0024-9400

4.3 Printer Paper Replacement

Parts Required:

• Replacement Paper Roll (refer to Section 6.1)

Procedure:

1. Open printer by pressing the printer’s front-panel latch. See Figure 4-2.

2. The paper-roll carrier is mounted on the rear of the printer’s front panel

and will swing out when the printer is opened.

3. Pinch in the two paper-roll clips at end of paper carrier; then remove

paper-retainer disk and empty roller from carrier.

4. Install a new paper roll and the paper-retainer disk onto the paper

carrier.

5. With analyzer turned on, position paper at entry point of printer’s feed

mechanism. The paper will be sensed by the mechanism and be

automatically fed through the printer and into the proper position for

printing.

Tip: To correct for minor paper misalignment, press the printer’s front panel

paper-feed button until the paper self aligns.

Figure 4-2. Installing Printer Paper

FRONT PANEL

LATCH

PAPER CARRIER

PAPER FEED

MECHANISM

PAPER ROLL

CLIPS

PAPER RETAINER

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 85 86

Sin comentarios

Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 67