Bacharach Flue-Gas Sample Conditioning System Especificaciones descargar pdf (Pagina 40)

Operation ECA 450

36 Instruction 0024-9400

2.17.1 Temperature Units

Select to display the temperature in either degrees centigrade (C) or

Fahrenheit (F) as follows:

1. Press SETUP key to display the Setup List screen.

2. Use ∧∨ keys to place cursor next to “Temperature Units”; then press

ENTER to display the Temperature Units screen.

Temperature Units

°C

ª °F

3. Place cursor next to either “°C” or “°F”; then press ENTER to make the

selection and return to Setup List screen.

2.17.2 Pressure Units

Select to display pressure units in either inches of water column (inwc),

millibars (mb), Pascals (Pa), or hecto Pascals (hPa) as follows:

1. Press SETUP key to display the Setup List screen.

2. Use ∧∨ keys to place cursor next to “Pressure Units”; then press ENTER

to display the Pressure Units screen.

Pressure Units

ª inwc

hPa

3. Use ∧∨ keys to place cursor next to either “inwc”, “mb”, “Pa”, or “hPa”;

then press ENTER to activate selection and return to Setup List screen.

2.17.3 Pollution Units

The analyzer is capable of converting the measured ppm levels of CO, NO,

, and SO

to various pollution units using CFR40 Part 60 emission

factors. Note that the pollution-unit conversions for NO, NO

and NOx are

based on the molecular weight of NO

Select to display the measured levels of CO, NO, NO

, and SO

in either parts

per million (ppm), pounds of pollutant per million BTU (#/Mbtu), milligrams

of pollutant per cubic meter of gas (mg/m

), or grams of pollutant per

gigajoule (g/GJ) as follows:

4. Press SETUP key to display the Setup List screen.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 85 86

Sin comentarios

Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 40