Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 24
- Pagina / 86
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operation ECA 450
20 Instruction 0024-9400
2.11 Downloading Data to a Personal Computer
Test data that was stored in memory can be downloaded to a personal
computer in ASCII text, comma-delimited format, which can then be
imported into most spreadsheet programs for analysis.
The following describes how to download data to a computer that is running
Windows®95/98, using HyperTerminal as the communications program. If a
different operating system and/or communications program is being used,
then consult the appropriate instruction manuals for those products.
Tip: To install HyperTerminal, first insert the Windows 95/98 CD, then click
Start, point to Settings, click Control Panel, double-click Add Remove
Programs, click Windows Setup, double-click Communications, select the
HyperTerminal check box, click OK twice.
1. Install serial data cable P/N 0104-4027 (straight through, 6 foot, DB9
male to DB9 female) between the computer’s COM port and the
analyzer’s RS232 connector. (For computers having a 25-pin COM port,
either use a 25-pin to 9-pin adapter, or use a serial cable with appropriate
connectors on each end.)
2. At the computer, start HyperTerminal by doing one of the following:
• If HyperTerminal has already been set up to communicate with the
ECA 450, then click Start, point to Programs, point to Accessories,
point to Communications, click HyperTerminal, and double-click
the file name or icon that has been associated with the ECA 450.
• If HyperTerminal has never been run in association with the ECA 450,
then a new HyperTerminal connection needs to be made as follows:
a) Click Start; click Run. In the Run box type “hypertrm.exe” and
click OK. The New Connection dialog box should appear.
b) Type in a New Connection Name such as “ECA450”. Click OK to
select the default icon (if desired, select a different icon before
clicking OK). The Connect To dialog box should appear.
c) Click the Connect using drop-down menu and choose the COM
port to which the analyzer is connected. Then click OK to display
the COM Properties dialog box for that COM port.
d) Set Port Settings to:
- Bits per second: 19200
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow control: None
Then click OK to display HyperTerminal’s main window.
e) Click File; click Save. This creates a file with an .ht extension in
the folder C:\Program Files\Accessories\Hyper Terminal, using
the name that was entered in Step b.
- Model 450 1
- Notice: 2
- Table of Contents 3
- Contents ECA 450 4
- 1 Introduction 5
- 1.3 Technical Data 6
- Accuracy: 7
- 4 Instruction 0024-9400 8
- 1.4 Operation Overview 9
- Introduction ECA 450 10
- 6 Instruction 0024-9400 10
- 1.5.3 POWER (AC Adapter) 11
- 1.5.6 OPT (Option) 11
- 8 Instruction 0024-9400 12
- CALIBRATE 13
- 10 Instruction 0024-9400 14
- 2 Operation 15
- 2.3 Fuel Selection 16
- ECA 450 Operation 17
- Instruction 0024-9400 17
- Operation ECA 450 18
- 14 Instruction 0024-9400 18
- 2.7 Saving Test Data 20
- 2.8 Clearing Memory 20
- 18 Instruction 0024-9400 22
- 2.10 Printing Data 23
- 20 Instruction 0024-9400 24
- 2.12 Data Logging 26
- 24 Instruction 0024-9400 28
- Line 1: Column Headings 30
- 2.14.1 Thermocouple Method 31
- 28 Instruction 0024-9400 32
- 2.14.3 Thermometer Method 33
- 30 Instruction 0024-9400 34
- 2.16 Statistics Mode 36
- 34 Instruction 0024-9400 38
- 2.17.1 Temperature Units 40
- 2.17.2 Pressure Units 40
- 2.17.3 Pollution Units 40
- 2.17.4 Language 41
- 2.17.5 Date 41
- 2.17.6 Time 42
- 2.17.7 O 42
- Reference 42
- 2.17.8 Test ID 43
- 40 Instruction 0024-9400 44
- 42 Instruction 0024-9400 46
- 2.17.9 Display Timeout 47
- 2.17.10 Display Format 47
- 44 Instruction 0024-9400 48
- 2.17.11 Primary Air 49
- 2.17.12 Data Logging 49
- 2.17.13 Statistics 49
- 2.17.14 User Name 49
- 2.17.15 Keypad Sound 50
- 2.17.17 Print Pressure 52
- 2.17.18 Information 52
- 3 Calibration 53
- PRESSURE 54
- ECA 450 Calibration 55
- Calibration ECA 450 56
- 52 Instruction 0024-9400 56
- 3.7 Calibrate HC Sensor 58
- 3.8 Calibrate CO-LO Sensor 59
- 56 Instruction 0024-9400 60
- 3.9 Calibrate SO 61
- Sensor 61
- 3.10 Calibrate NO Sensor 62
- 3.11 Calibrate NO 63
- 3.12 Calibrate CO-HI Sensor 64
- 4 Maintenance 65
- Maintenance ECA 450 66
- 62 Instruction 0024-9400 66
- ECA 450 Maintenance 67
- 64 Instruction 0024-9400 68
- 4.4.1 O 69
- , CO, NO, NO 69
- , & SO 69
- Sensor Replacement 69
- 66 Instruction 0024-9400 70
- 4.4.3 HC Sensor Replacement 71
- PARTICULATE FILTER 72
- (Install with arrow pointing 72
- WATER TRAP/FILTER ASSEMBLY 73
- GAS HOSE 73
- RESET BUTTON 74
- 5 Troubleshooting 76
- 5.3 Error Symbols 77
- 5.4 Troubleshooting Guide 78
- ECA 450 Parts & Service 79
- 76 Instruction 0024-9400 80
- 78 Instruction 0024-9400 82
- 6 Parts & Service 83
- 6.2 Accessories 84
- 6.3 Service Centers 85
Relacionado con productos y manuales para De medición, control y control Bacharach Flue-Gas Sample Conditioning System
(100 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales