Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 47
- Pagina / 86
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ECA 450 Operation
Instruction 0024-9400
43
2.17.9 Display Timeout
To conserve battery life, the vacuum fluorescent display panel can be
configured to turn itself off after 5 to 60 minutes of keyboard inactivity.
Select the display’s time-delay off period as follows:
1. Press SETUP key to display the Setup List screen.
2. Use ∧∨ keys to place cursor next to “Display Timeout”; then press ENTER
to show the Display Timeout screen.
Display Timeout
n
Where: n = current timeout period
3. Use ∧∨ keys to select desired timeout period in 5 minute increments from
“Never” (no timeout) to “60” minutes; then press ENTER to make the
selection and return to Setup List screen.
2.17.10 Display Format
The order in which data is displayed in the Combustion Test HOLD/RUN
screen can be rearranged to better suit an operator’s needs. The default order
of this data is as follows:
Note: Depending on what sensors are installed, some of the data listed below
may not be displayed.
O2 = % Oxygen
CO = Carbon Monoxide
EFF = % Combustion Efficiency
CO2 = % Carbon Dioxide
T-STACK = Stack Temperature
T-AIR = Room/Primary-Air Temperature
EA = % Excess Air
NO = Nitric Oxide
NO2 = Nitrogen Dioxide
NOX = Oxides of Nitrogen (combination of NO and NO
2
)
SO2 = Sulfur Dioxide
HC = % Combustibles (Methane based)
CO(n) = Carbon Monoxide content referenced to a percentage of Oxygen
NO(n) = Nitric Oxide referenced to a percentage of Oxygen
NO2(n) = Nitrogen Dioxide referenced to a percentage of Oxygen
NOX(n) = Oxides of Nitrogen (combination of NO and NO2) referenced to
a percentage of Oxygen
SO2(n) = Sulfur Dioxide referenced to a percentage of Oxygen
- Model 450 1
- Notice: 2
- Table of Contents 3
- Contents ECA 450 4
- 1 Introduction 5
- 1.3 Technical Data 6
- Accuracy: 7
- 4 Instruction 0024-9400 8
- 1.4 Operation Overview 9
- Introduction ECA 450 10
- 6 Instruction 0024-9400 10
- 1.5.3 POWER (AC Adapter) 11
- 1.5.6 OPT (Option) 11
- 8 Instruction 0024-9400 12
- CALIBRATE 13
- 10 Instruction 0024-9400 14
- 2 Operation 15
- 2.3 Fuel Selection 16
- ECA 450 Operation 17
- Instruction 0024-9400 17
- Operation ECA 450 18
- 14 Instruction 0024-9400 18
- 2.7 Saving Test Data 20
- 2.8 Clearing Memory 20
- 18 Instruction 0024-9400 22
- 2.10 Printing Data 23
- 20 Instruction 0024-9400 24
- 2.12 Data Logging 26
- 24 Instruction 0024-9400 28
- Line 1: Column Headings 30
- 2.14.1 Thermocouple Method 31
- 28 Instruction 0024-9400 32
- 2.14.3 Thermometer Method 33
- 30 Instruction 0024-9400 34
- 2.16 Statistics Mode 36
- 34 Instruction 0024-9400 38
- 2.17.1 Temperature Units 40
- 2.17.2 Pressure Units 40
- 2.17.3 Pollution Units 40
- 2.17.4 Language 41
- 2.17.5 Date 41
- 2.17.6 Time 42
- 2.17.7 O 42
- Reference 42
- 2.17.8 Test ID 43
- 40 Instruction 0024-9400 44
- 42 Instruction 0024-9400 46
- 2.17.9 Display Timeout 47
- 2.17.10 Display Format 47
- 44 Instruction 0024-9400 48
- 2.17.11 Primary Air 49
- 2.17.12 Data Logging 49
- 2.17.13 Statistics 49
- 2.17.14 User Name 49
- 2.17.15 Keypad Sound 50
- 2.17.17 Print Pressure 52
- 2.17.18 Information 52
- 3 Calibration 53
- PRESSURE 54
- ECA 450 Calibration 55
- Calibration ECA 450 56
- 52 Instruction 0024-9400 56
- 3.7 Calibrate HC Sensor 58
- 3.8 Calibrate CO-LO Sensor 59
- 56 Instruction 0024-9400 60
- 3.9 Calibrate SO 61
- Sensor 61
- 3.10 Calibrate NO Sensor 62
- 3.11 Calibrate NO 63
- 3.12 Calibrate CO-HI Sensor 64
- 4 Maintenance 65
- Maintenance ECA 450 66
- 62 Instruction 0024-9400 66
- ECA 450 Maintenance 67
- 64 Instruction 0024-9400 68
- 4.4.1 O 69
- , CO, NO, NO 69
- , & SO 69
- Sensor Replacement 69
- 66 Instruction 0024-9400 70
- 4.4.3 HC Sensor Replacement 71
- PARTICULATE FILTER 72
- (Install with arrow pointing 72
- WATER TRAP/FILTER ASSEMBLY 73
- GAS HOSE 73
- RESET BUTTON 74
- 5 Troubleshooting 76
- 5.3 Error Symbols 77
- 5.4 Troubleshooting Guide 78
- ECA 450 Parts & Service 79
- 76 Instruction 0024-9400 80
- 78 Instruction 0024-9400 82
- 6 Parts & Service 83
- 6.2 Accessories 84
- 6.3 Service Centers 85
Relacionado con productos y manuales para De medición, control y control Bacharach Flue-Gas Sample Conditioning System
(100 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales