Bacharach Flue-Gas Sample Conditioning System Especificaciones descargar pdf (Pagina 66)

Maintenance ECA 450

62 Instruction 0024-9400

4.2 Water-Trap / Filter Assembly

The Water-Trap / Filter Assembly removes water condensate from the gas

sample, and also prevents soot from contaminating the internal components

of the analyzer.

Figure 4-1. Water Trap / Filter Assembly

Outlet

End

Inlet

End

Riser Tube

Filter Element

End-Cap

Drain the water condensate after every use.

Procedure:

1. Pull off end-cap from inlet end of the Water-Trap / Filter Assembly.

2. Pour out all of the water condensate; then replace end-cap.

Replace the filter element when it becomes excessively dirty.

Parts Required:

• Filter Element (refer to Section 6.1)

Procedure:

1. Pull off end-cap from outlet end of Water-Trap / Filter Assembly.

2. Remove and discard old filter element.

3. Install a new filter element; then replace end-cap.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 85 86

Sin comentarios

Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 66