Bacharach Flue-Gas Sample Conditioning System Especificaciones descargar pdf (Pagina 20)

Operation ECA 450

16 Instruction 0024-9400

2.7 Saving Test Data

By pressing the SAVE key, data that is currently being displayed in either

the Combustion Test or Pressure screen is stored in one of the analyzer’s over

1000 internal memory locations. Observe that the following message appears

when the SAVE key is pressed.

Saving Memory

Location nnnn

Where: nnnn = memory location number

At a later time, the stored data can be recalled for either viewing or

downloading as described in Section 2.9 Recalling Test Data Stored in

Memory.

Once all memory locations are filled, an attempt to save additional data will

cause the message “Memory Full” to be momentarily displayed. To save

additional data, memory must first be cleared per Section 2.8 Clearing

Memory.

Tip: Before clearing memory, its contents can be downloaded to a personal

computer for permanent storage per Section 2..11.

2.8 Clearing Memory

Clear all memory locations as follows:

1. Press MEMORY key to display the Memory menu screen.

2. Use ∧∨ keys to place cursor next to “Clear Memory”; then press ENTER.

«««««««MEMORY«««««««

Memory Directory

Transmit Memory

ª Clear Memory

3. Use ∧∨ keys to place cursor next to “Yes” (or “No” if you decide not to

clear memory); then press ENTER. Observe that the message “Clearing

Memory . . .” appears as memory is being cleared.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Sin comentarios

Bacharach Flue-Gas Sample Conditioning System Especificaciones Pagina 20