Bacharach Fyrite INSIGHT PLUS Manual de instrucciones Pagina 75

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 74
Fyrite
INSIGHT
Plus Manual Operation
0024-9487 Rev 2 69
4.6. Printing Using the Optional IrDA Printer
The instrument has the ability to store, recall (to the display), and print sets of
time- and date-coded test records. The time and date are set through software
menu selections (see page 36).
Displaying stored records is done through the MEMORY DIRECTORY
MENU (see page 30).
Press F1 to print displayed test records.
Step Example Printing Procedure Using Optional IrDA Printer
1
Fyrite
INSIGHT
Plus should be turned on and displaying a screen with an
F1 Print option.
2 Check for a sufficient supply of paper and batteries in the IrDA printer.
3 Turn on the printer (slide switch on side of printer to the ON position)
4 Position the printer within 8 to 16 inches (20 to 41 cm) from the
instrument and at no greater than a 60-degree angle (see page 71).
5 Press F1 to print and turn off printer when complete.
Sample Run Screen Printouts for North American (left) and Siegert (right)
Combustion Equations are shown below.
Fyrite
INSIGHT
Plus provides three lines of 20 characters for user
information. This information will appear with test records when they are
printed or downloaded. User name and optional information are entered via
software menu selections in the SETUP MENU (see page 43) or via the Fyrite
User Software (FUS).
Vista de pagina 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 115 116

Comentarios a estos manuales

Sin comentarios