
Fyrite
INSIGHT
Plus Manual Configuration
0024-9487 Rev 2 47
Setup Menu Function
The analyzer can be set to indicate a calibration
reminder during warmup. Calibration reminders can
be disabled (set to “Never”), or set to occur at 6, 8, 10,
12, or 15 months after the last calibration. When the
preset period is exceeded the instrument will display
the reminder, and how long since the sensors were last
calibrated. If a calibration reminder is displayed, the
operator can press the RUN/HOLD key to move to the
RUN/HOLD Screen for normal operation. Regular
calibration periods
of 6 months to 1 year are
recommended.
NOTE: The default CAL Reminder Period
is set to NEVER.
Set the calibration reminder period as follows:
1. Use the UP (
) and DOWN (
) arrow buttons to
select the desired time period.
2. Press ENTER to save the selection or ESC to revert
to the previous setting.
NOTE: The date and time settings must
be correct to get accurate calibration
reminders.
Comentarios a estos manuales