Bacharach PCA3 Especificaciones descargar pdf (Pagina 56)

PCA



3 Manual

56 0024-9473 Rev 4

Figure 5-16. Turning On Data Logging

5.12.3. Setting the Logging Interval and Duration

The logging interval is the length of time between measurements, while the

logging duration is the time allocated to the logging process. Set the logging

interval and duration as follows.

NOTE: If the duration is set for more than 10 hours, we recommend

using the optional AC power adapter to power the analyzer.

1. As soon as logging is turned ON (see Logging Selection on page 35),

the LOGGING INTERVAL screen appears.

2. Use the ▲▼ buttons to highlight the desired interval, and then press

ENT to make the selection and display the LOGGING DURATION

screen. In this example, 1 minute has been selected.

3. Use the ▲▼ buttons to highlight the desired duration, and then press

ENT to make the selection and display the LOGGING SUMMARY

screen. In this example, 2 hours has been selected.

NOTE: I

f the selected duration requires more memory

than is currently available, the analyzer will automatically

select the longest duration possible for the selected

interval.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Sin comentarios

Bacharach PCA3 Especificaciones Pagina 56