Bacharach Informant 2 Especificaciones descargar pdf (Pagina 11)

The Informant™ 2

0019-9211 Rev 9 7

2.4. Combustibles Sensor Installation

Install the combustibles sensor, filter, and “red” probe tip onto the end of

the detector’s flexible probe as shown in Figure 3b. Observe the red

color coding on both the sensor and probe tip.

NOTE: The Informant 2 is intrinsically safe only when its

combustibles sensor is installed.

Figure 3b. Sensor Installation (Combustibles Sensor)

2.5. Turning the Detector On and Off

See Figure 4. The detector is toggled ON and OFF by pressing the

POWER

button.

When first turned on, observe that the Power LED glows and that all

other LEDs are tested by being turned on for 1 second.

The detector requires 10 seconds to warm up. After which time all LEDs

should be off except for the Power LED, along with the probe tip blinking

and audible indicator ticking at approximately once-per-second.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sin comentarios

Bacharach Informant 2 Especificaciones Pagina 11