Bacharach LonWorks FT-10 Guía de instalación descargar pdf (Pagina 3)

3 of 18

If an RDM800 remote display IS to be used with the adapter, refer to Figure 3 for wiring

details. Note that when the RDM800 is used, TWO RS-485 cables must be run between

the HGM300 and RDM800, so plan accordingly.

In either case, be sure to set the HGM300’s internal “Terminator” slide switch next to the

RS-485 terminal block to the “In” position.

1 2 3 4 5 6 7 8 ... 17 18

Sin comentarios

Bacharach LonWorks FT-10 Guía de instalación Pagina 3